How is this EM technology built?
The whole aim of the EM technology in UFO reports is to make full use of a high oscillating voltage/charge on the smooth surface of a metal hull and have this charged positioned in such a way as to help emit radiation for propulsion so as to cause the object to move in one direction. This positioning of the charge or variation in charge density through the use of curvature of the metal hull needs to be adjusted in the event that the object needs to stop acceleration. Although radiation always moves solid matter, whether or not it is charged, the decision by the makers of this technology to use radiation for propelling an object is because of the type of acceleration that takes place: it is said to be "exponential". It is for this very reason why we have symmetrical UFOs having occupants inside of them. Someone has discovered the concept and have implemented it in a real-life technology. And now, finally, it is our turn to try it out for ourselves.
Now in order to apply this EM concept, you must first try to concentrate energy from the surroundings. Space contains energy. Therefore, the simplest way to achieve this is to apply an oscillating charge on the surface of the metal hull. Generally, the higher the frequency of the oscillating charge and the greater the charge itself over a given area, the more the charge will concentrate the energy of space.
Second, you must tap onto this energy to produce a voltage/charge. The most effective and lowest-cost solution to achieve this task is to add a large metal antenna to the spacecraft design. The aim here is to electromagnetically cut through the concentrated energy as a way to generate a voltage at opposite ends of the antenna.
Third, we need to store the electrical energy. One possible solution is to build a large super-conducting ring (beneath the floor) cooled by the temperature of space (unless it is some kind of alien technology to allow for room temperature superconductors to exist &$151; just something to think about). This ring will allow electrical energy to be stored in large quantities as it circulates inside the ring endlessly without frictional resistance. Indeed, the presence of an initial energy source to start providing an oscillating charge for a spacecraft starting in a rest position is possible with the help of this super-conducting ring. Otherwise, use a fuel-based engine that can generate vast amounts of voltage/charge.
Fourth, we begin to utilise some of the stored energy to generate an oscillating voltage/charge. As the energy slowly builds up in the "battery system", a moment will come when some of the energy can be used to help power the electromagnetic propulsion system. Wrap an electrically conducting coil (and insulated) around a portion of the ring to help pick up on some of this circulating electrical energy. For the charge in the coil to be oscillating, we use a fast mechanical switching device (it will make the sound of a buzz or like bees humming, due to the tiny noise produced by metal parts making the briefest contact). If you design the system in a clever way, you can switch in one direction to enable energy to be injected into the ring by one set of coils. Switch it in the opposite direction for some of the energy from the surrounds to be extracted. It means that the whole machine can start to "breathe" in an electromagnetic way. The ring is acting like the "lungs" of an organism. Instead of storing and expelling air as living things do, an electromagnetic spacecraft would store and expel electrical energy.
Fifth, it is time to place some of this oscillating energy onto the surface of the spacecraft as part of the process of preparing the spacecraft to propel itself. Why? Because what you are aiming for is to generate radiation emissions from a charged surface. As every scientist will tell you, radiation has the inherent ability to move solid matter, whether or not the matter itself is charged. It means that there is expected to be some kind of acceleration when a force from the radiation is exerted onto solid matter.
But how do we actually make the spacecraft accelerate?
To accelerate, we need an outer metal shell. Not just any metal shell, but one made of a superelastic, high-temperature resistant and tough shape-memory alloy. Now here is the clever bit. By using a shape-memory alloy, it will be flexible enough to permit a mechanical device inside the spacecraft to distort the shape slightly. It doesn't have to be much. Just enough to make the shape of the outer metal shell asymmetric in a specific way with the aim of getting the spacecraft to move in a straight line. Suddenly the radiation emission causes the charged object to accelerate. Depending on frequency and voltage and how lightweight the spacecraft is, the acceleration could be dramatic or start slowly. It doesn't matter. So long as there is acceleration. Because once you have acceleration, the object will move in an increasingly more dramatic way over time.
A kind of runaway result, you might say.
Finally, due to the intense oscillating electromagnetic fields being generated externally, we need a symmetrical inner metal shell (it could be a sphere, a cube, or hemisphere, for example) separated from the outer metal shell by a gap. This inner shell does not need to change its shape. Its main purpose is to be as perfectly symmetrical as possible to help protect people and instruments from the radiation emissions on the outside. This is the familiar Faraday's cage for reducing EM fields internally. However, there is one more unexpected benefit from having this inner shell. You see, radiation generates a gravitational field in accordance with Einstein's Unified Field Theory, and it is believed the gravitational field and the oscillating electromagnetic field could be one and the same field. If this is true and experiments can prove or show it is highly likely the concept is valid, then should one field go down in its energy density, so does the other field. Thus, inside a symmetrical Faraday cage of the spacecraft, not only does the oscillating electromagnetic field get reduced to zero (or very close to it, depending on how symmetrical the metal box is), but also the gravitational field must reduce as well. Since it is the gravitational field that causes the inertial forces to get exerted on your body, you will now have a means of controlling gravity and the inertial forces internally.
This interesting discovery now makes it possible to explain how UFOs can rapidly accelerate or change directions. It is not a perfect or instantaneous acceleration or change in direction. There is a limit on how much the pilots of the EM flying machine can withstand the inertial forces. But with the right type of thin and short pilots (bred to be like certain flying insects here on Earth due to their incredible light weight nature), they can achieve more dramatic changes in acceleration than the average well-trained human pilot of any military fighter jet.
Welcome to the brave new EM technology that is emerging from the UFO reports.